When tadhesive for underfloor heating boards is used to bond aluminum foil and foam boards, it needs to have sufficient adhesiveness to ensure the close adhesion of the aluminum foil and the foam boards.
| classification | material type | physical index | manner of execution | |||
| viscosity(180℃)/cps | Soften Point/℃ | colour | usage temperature | |||
| thermal insulation material | heated board | 200-4000 | 75-95 | yellow/white | 150-180℃ | glue spray |
| underfloor heating | 2500-7000 | 85-110 | white | 150-180℃ | overgluing/glue spray | |
Features
Strong viscosity
Form a firm adhesive force on the surfaces of two materials with different properties to prevent them from separating during use.
Good temperature resistance
Whether in the cold winter or the hot summer, the firm bonding between the aluminum foil and the foam board must be ensured.
Fast construction speed
It can quickly carry out the bonding operation after being heated and melted. There is no need to wait for the drying process such as the evaporation of solvents
Environmental protection
It complies with relevant environmental protection standards and does not release a large amount of harmful volatile organic compounds (VOC) during heating and use.
precautions for product use
The hot melt adhesive tank must be tightly covered to prevent debris from falling into and affecting the performance of the adhesive.
The bonding performance of hot melt adhesive will be affected by different temperatures, it is recommended not to stock too much or consult our engineers and sales staff before purchasing.
This product should be stored in a clean and dry warehouse that is well ventilated, away from heat sources and not exposed to direct sunlight.
Due to the influence of the color of raw materials, each batch of products may have a certain color difference, but it does not affect its bonding performance.
Our production and equipment
19
years
We have been working in the industry since 2005
18
certificates
We have obtained most of the professional certificates in the industry and insist on international standards of production.
13
LINES
We have 13 hot melt adhesive production lines with a daily capacity of 50 tons.
Company Introduction
The factory covers an area of 15,000m² and has a daily output of up to 100 tons, adopting a digital management system to monitor the entire process from raw materials to hot melt adhesive finished products, ensuring stable product quality and providing customers with high-quality bonding solutions.
Professional team
Backed by the support of a team of dedicated Chemical Engineers, Adhesive Specialists and Customer Support Managers.
Cutomer service
Provide customers with a full range of service support systems, with a complete pre-sales, sales, and after-sales service system.
4500+
Customers
19+
R&D Experience
13
Production Lines
100+
Projects Completed
Our Certificate
PFOS
REACH
ISO
RoHS
Our Service
Provide one - stop solutions for bonding applications.
01
Pre-sale service
Recommend suitable hot - melt adhesive products according to customer requirements.
02
Installation service
Provide application guidance for hot - melt adhesives and assist customers in dealing with problems that may be encountered during the construction process of hot - melt adhesives.
03
After-sales service
7×24 - hour one - to - one service,respond to consumer questions,answer consumer inquiries,and deal with consumer comments.
