
Bubble bag manufacturers need to pay attention to the following points when using hot melt glue in summer:
First, pay attention to the storage environment. Due to the high temperature in summer, the bubble bag hot melt adhesive should be placed in a cool and ventilated place to avoid changes in the performance of the adhesive caused by direct sunlight, or even soften.
Secondly, we should pay attention to the use temperature of the glue. In summer, the ambient temperature is high, which may change the melting state of the glue. It is necessary to adjust the heating temperature and the use temperature according to the actual situation to ensure the fluidity and bonding effect of the glue.
Moreover, we should pay attention to the opening time and curing time of the glue. High temperature may shorten the opening time, and more rapid and accurate operation is needed to avoid premature curing of glue.
In addition, pay attention to the maintenance and cleaning of the equipment. Ensure that the hot melt adhesive equipment can operate normally in high temperature environment to prevent failure due to high temperature.
Finally, the bonding effect should be closely monitored. Due to the special environment in summer, it is necessary to find out the possible problems such as poor adhesion in time and take corresponding measures to solve them. Hangzhou Boiling hot melt adhesive source factory has 11 years of research and development experience in the field of express bags and bubble bags. If you have relevant questions, you can consult us at any time!
