Construction Technology Of Hot - Melt Adhesive For Decorative Paintings

Dec 13, 2024

Leave a message

hot melt adhesive

Decorative paintings are works of art that integrate decorative functions and aesthetic appreciation. With the progress and development of science and technology, the carriers and forms of expression of decorative paintings have become increasingly diverse, greatly enhancing people's pursuit and love for a quality life nowadays. As the living standards continue to improve, our requirements for the quality of life are also getting higher and higher, and we will improve the quality of life through various means. How are exquisite decorative paintings made? Generally, hot melt adhesive is used as a binder for decorative paintings. There are two common construction methods for hot melt adhesive in decorative paintings:

One is the gluing construction method. That is, the canvas or the substrate is glued through rollers, and then it is laminated with the other side after being glued. This construction method takes relatively less time, and has low requirements for the curing time of the product. Polyolefin products can be chosen. Such products have the characteristics of fast curing time, good construction fluidity, and excellent anti-aging performance. Of course, pressure-sensitive adhesive series can also be used. This type of product has relatively low requirements for construction time and can extend the laminating time for precise positioning, which is more suitable for gluing large-sized products.

The other is the spraying method. The advantage of this construction method is that the uniformity of gluing will be better, which is conducive to spreading the glue evenly, increasing the adhesion of the product, and at the same time helping to increase the service life of the finished product. However, it has higher requirements for the glue. It requires a certain open time and high fluidity. If the fluidity is poor, there will be wire drawing, glue accumulation may occur, and the surface of the canvas will be uneven, affecting the aesthetics. If the open time is too short, the surface of the product will cure quickly, resulting in false adhesion and causing the product to fall off.

These two construction methods each have their own advantages and disadvantages. It is necessary to match suitable hot melt adhesives for decorative paintings to increase the adhesiveness of the product and improve the performance of the product.