How Can The Quality Of Pressure - Sensitive Adhesives Be Distinguished?

Dec 07, 2024

Leave a message

pressure-sensitive adhesives

1. Solid content
Solid content is one of the important factors affecting the quality of pressure-sensitive adhesives. The higher the solid content, the stronger the adhesive force and the faster the drying speed.

2. pH value
Most synthetic resin adhesives are slightly acidic and will not have a negative impact on the bonding process. However, water glass and starch adhesives have relatively high alkalinity. High alkalinity will not only cause corrosion to workers and equipment but also sometimes corrode the adherends, forming stains that affect the appearance. Therefore, when purchasing adhesives, it is necessary to consider the impact of the pH value on the product.

3. Bonding strength
Pressure-sensitive adhesives must first have sufficient bonding strength to ensure the normal use of the bonded objects. To judge whether the bonding strength of an adhesive is qualified, you can tear two pieces of bonded materials along the bonding interface. If the bonded materials are damaged after being torn apart, it proves that the bonding strength is sufficient; if only the bonding interface separates, it indicates that the strength of the adhesive is insufficient.

4. Viscosity
Viscosity is the most important factor affecting the quality of adhesives. If the viscosity is too high, the coating will be thicker, more glue will be consumed, and the drying process will be slowed down. It will also affect the wetting and penetration of the adhesive on the surface of the adherend, which will directly affect the bonding strength. If the viscosity is too small, the coating will be thinner, the drying will be too fast, and problems such as poor bonding may easily occur.

5. Drying speed
When purchasing pressure-sensitive adhesives, it is necessary to evaluate whether the drying speed matches the bonding process. Generally, the speed of manual bonding processes is relatively slow and requires a longer initial drying time, while the speed of machine bonding processes is very fast and requires a short initial drying time. As for the complete drying time, in most cases, the faster the better, so that the next process can be carried out as soon as possible.

The pressure-sensitive adhesive produced by Hangzhou Banglin is a new type of environmentally friendly adhesive tape made by mixing synthetic rubber, resin, rubber oil, etc., heating them into a molten state, and then coating them on substrates such as tissue paper, cloth, or plastic films. Its greatest advantage is its low cost. It is mainly used for various box sealing, carton sealing, paper product packaging, beverage bottle labels, sealing aluminum foil, flexible packaging, and other packaging applications as well as environmentally friendly paper pallets, and it is suitable for various materials.