How To Choose Hot - Melt Adhesives For Hygiene Products?

Dec 18, 2024

Leave a message

The Hot - Melt Adhesive Manufacturer Tells You How To Choose Hot - Melt Adhesives For Shoe Materials

The most commonly used hot-melt adhesives in hygiene product bonding are structural adhesives and back adhesives. Other adhesives such as elastic adhesives and urine indicator adhesives may not even be needed depending on different production processes. As the core material of the non-woven fabric coating and laminating process, hot-melt adhesives for hygiene products undertake the important task of structural bonding and are widely used in hygiene products. If the structural bonding of hygiene products is too weak, it will lead to

unstable bonding between materials, easy foaming, easy shedding, and adverse phenomena such as leakage. If the strength is too high, it will easily make the fiber structure hard, brittle, and difficult to penetrate. Therefore, choosing high-quality structural adhesives for hygiene products and substrates and closely cooperating with production equipment and processes can produce high-quality and qualified hygiene products.

Therefore, when choosing hot-melt adhesives for hygiene products, the following properties should be focused on:

1. Good thermal stability
The normal working temperature of hot-melt adhesives for hygiene products is about 170°C. At this temperature, polymer materials will undergo phenomena such as bond breaking or bonding for a long time under heat. High-quality hot-melt adhesives must provide good anti-aging and anti-cracking properties for application manufacturers. Hot-melt adhesives with poor thermal stability will be prone to carbonization, and these carbon deposits will adhere to the inside of the glue tank and die head, affecting normal operation.

2. Appearance
Hot-melt adhesives for hygiene products should be light-colored, transparent or partially transparent hot-melt adhesives so as not to affect the overall aesthetics of the product.

3. Special bonding performance
No adhesive is omnipotent. The basic physical property requirements for using hot-melt adhesives in hygiene product production are that the bonding force between the hot-melt adhesive and the adherend should be greater than the tensile strength and shear force of the non-woven fabric. In addition, cold resistance and bonding force to some low-polarity substances should also be considered.

Hangzhou Banglin Adhesive Technology Co., Ltd. focuses on the research, development, production and sales of hot-melt adhesives. The hot-melt adhesives for hygiene products produced by the company have good thermal stability, light color, light odor, no fluorescence, and are safe and environmentally friendly. If you happen to have such needs, welcome to consult and negotiate through the contact information below.