How To Choose The Hot - Melt Adhesive For Hook - And - Loop Fasteners?

Mar 13, 2025

Leave a message

Hook-and-loop fasteners are quite common items in our daily lives. We use them in many things such as clothes and shoes. And the key material for manufacturing hook-and-loop fasteners is the hot melt adhesive for hook-and-loop fasteners. There are many hot melt pressure-sensitive adhesives on the market, and many hook-and-loop fastener manufacturers don't know how to choose among so many products. Below, we will explain the characteristics of the adhesives used for hook-and-loop fasteners.

First of all, it should be noted that a certain type of hot melt adhesive for hook-and-loop fasteners may be suitable for one or more types of hook-and-loop fasteners. It is impossible to find a single adhesive that is suitable for all hook-and-loop fasteners. Therefore, we need to select the adhesive that suits us according to the characteristics of each type of hook-and-loop fastener. Generally, when choosing an adhesive for hook-and-loop fasteners, three characteristics need to be ensured.

**First, choose the appropriate adhesiveness**
It is not good if the bonding strength of the hook-and-loop fastener is either too strong or too weak. Only by maintaining the required bonding strength is the best. Usually, you can refer to three aspects: the initial adhesion strength, the peel strength, and the holding adhesion strength of an adhesive, and then make a choice.

**Second, choose the appropriate color**
The colors of hot melt adhesives for hook-and-loop fasteners on the market vary. Customers can consider the color selection of the adhesive according to the application scope of their own industries. Generally speaking, the yellow adhesive has stronger adhesion, and the white adhesive has weaker adhesion. When there is no color requirement, the yellow adhesive is preferred.

**Third, consider the heat resistance, weather resistance, etc. of the adhesive**
Hot melt pressure-sensitive adhesives are greatly affected by temperature and climate. Therefore, when choosing a pressure-sensitive adhesive, it is necessary to make a selection according to the usage conditions of your own products. For example, if the usage temperature of your own products is relatively high, then you need to choose those hot melt adhesives for hook-and-loop fasteners with good high-temperature resistance. Conversely, choose the adhesive with low-temperature resistance. Because the usage temperature of the pressure-sensitive adhesive has a certain range. When high temperature resistance is selected, a certain amount of low-temperature performance will be sacrificed. So customers need to make a choice according to their own needs.