How To Select The Adhesive For The Windscreen Film Velcro?

Jan 06, 2025

Leave a message

Know Hot Melt Glue

As November approaches, the weather is getting colder, especially in northern regions where the temperature drops sharply and there is a lot of wind and sand in winter. To prevent the cold air from entering the room and the indoor temperature from dissipating, people often use films to seal doors and windows in winter. In the early days, the method of using wooden frames and nails for fixation was adopted. However, this method was not only unaesthetic but also cumbersome to operate. Now, there has been a technological revolution. Directly using Velcro with adhesive backing for pasting can greatly reduce the construction difficulty and improve efficiency. Just peel and stick, and the sealing work can be easily completed.

Since hot - melt adhesives are so convenient, the requirements for the adhesive backing are relatively strict. Firstly, the adhesive backing should have good initial tack, which can meet the pasting requirements at around 0 degrees Celsius in low - temperature environments, ensuring quick and firm adhesion even in cold conditions. Secondly, it should have extreme cold resistance. Even in an outdoor low - temperature environment of - 30 degrees Celsius after pasting, the adhesive should not fall off. Thirdly, it also needs to have sufficient hanging - weight time. It should not fall off after being hung for a few days to ensure the durability of the seal. Finally, the adhesive backing should have good economic efficiency. In this highly competitive era, insufficient cost - effectiveness is unacceptable.

In response to these market demands, our company has developed a series of Velcro hot - melt adhesive products. For customers who focus on cost - effectiveness, they can use our 705 series of Velcro hot - melt adhesives. For customers with higher performance requirements, they can choose our 701 series of Velcro hot - melt adhesives. If there are special requirements, we also accept customized orders. In terms of the adhesive for windscreen film Velcro, we have a complete matching system. You can always find the most suitable product in our company. Choosing Boiling's Velcro hot - melt adhesives can provide you with value - for - money services, allowing you to easily seal doors and windows in winter.