How To Test The Adhesive Strength Of Hot Melt Adhesives?

Jul 30, 2024

Leave a message

The adhesive strength of a hot melt adhesive can be tested by the following steps:
1. Prepare the test material: Choose the same material as the test sample, such as wood, metal, plastic, etc.
2. Make a test sample: Cut the test material into plates of the same size and mark a rectangular area on the surface of each plate for applying hot melt adhesive.
3. Apply hot melt adhesive: Use a hot melt glue gun to evenly coat the hot melt adhesive over a rectangular area, ensuring that each area is the same thickness and uniformity.
4. Glue the specimen: Align the two test plates, making sure the hot melt adhesive completely covers the joint area, and gently press it together with your fingers or clamps.

5. Wait for curing: Allow the sample to cure at room temperature for a period of time, typically 1-2 hours.
6. Perform the test: Using a tensile testing machine or other appropriate equipment, fix one end of the sample and then stretch the other end of the sample at a constant rate until the sample breaks or separates. The maximum tensile strength and elongation at break of the sample were recorded.
7. Calculate Bond Strength: Bond strength can be calculated by dividing the maximum tensile strength by the joint area. The joint area can be obtained by multiplying the length and width of the rectangular area.
Through the above test steps, the adhesive strength of the hot melt adhesive can be obtained, and the performance of the hot melt adhesive can be judged according to the results.