Hot melt adhesive for bottle caps is a common raw material in production, especially in the liquor-making industry. In order to make the quality of bottle caps meet the packaging requirements, well-known liquor factories will also purchase hot melt adhesive according to strict standards.
The first requirement: The adhesive force must be excellent.
Different from hot melt adhesive for ordinary packaging, the construction area of hot melt adhesive for bottle caps is small, and it is impossible to add too much hot melt adhesive for bonding. Therefore, even a small amount of hot melt adhesive must meet the standards in terms of adhesive force and reach an excellent level. Otherwise, the hot melt adhesive will hardly play any role.
The second requirement: It must not cause stringing.
When applying hot melt adhesive to bottle caps, great care is needed. Besides having good adhesive force, the hot melt adhesive should not cause stringing either. Otherwise, it will make the post-treatment extremely troublesome, increase the construction difficulty and greatly reduce the construction efficiency.
Although there are a large number of hot melt adhesive products for bottle caps on the market, there are very few that have excellent adhesive force and do not cause stringing. As a hot melt adhesive supplier for well-known liquor factories such as Luzhou Laojiao and Jiannanchun, Banglin has been providing a series of environmentally friendly hot melt adhesives made of raw materials that meet the international FDA standards for many years, achieving high bonding performance with a low addition amount.