
Bonding generally refers to the adhesion of two items through the action of hot melt pressure-sensitive adhesive. The area where the two items are bonded is called the bonding surface. Before spraying the adhesive with a hot melt adhesive machine, we need to treat the surface of the bonded object to achieve better bonding. In the production and processing of any material, it is inevitable that some stains, oil stains, or impurities will adhere to it. If we directly spray the adhesive on the material with impurities, although the adhesive can be sprayed on, it is not stable, and the adhesive layer is likely to peel off easily. Therefore, no matter what kind of material it is, the surface must be treated first before spraying the adhesive. The main purposes of material surface treatment are as follows:
1. Remove various stains and some rust on the surface of the material to keep its surface clean. This allows the surface of the material to directly combine with the hot melt adhesive, ensuring the quality of bonding.
2. We roughen the surface of the material through chemical treatment or other methods to further enhance the bonding force between the adhesive layer and the material surface. This improves the protective performance and extends the service life.
There are many methods for surface treatment. Mechanical tools can be used as auxiliary means, and chemical treatment methods or manual methods can also be adopted. In terms of the overall effect, sandblasting has a better effect. Next is the manual method, but the labor intensity of manual treatment is relatively high, so it is less commonly used. Currently, most units that use hot melt pressure-sensitive adhesive electrostatic spraying adhesive mainly adopt sandblasting, but chemical treatment is also used. In some places, due to location limitations, the sandblasting method is likely to deform the material. If the operation is improper, the material may even be pierced through. Therefore, when cleaning the surface of the material, we should also pay attention to the usage method and make a selection based on the actual situation.
