
Hot melt adhesive is widely used, and the use of hot melt adhesive can be seen in our daily life. However, many times, many manufacturers are still wondering about the adhesion of hot melt adhesive, for example, some time ago, customers asked us why hot melt adhesive would not stick when the shoe material was compounded. Through this small case to answer such a question for everyone: What is the hot melt adhesive non-stick?
When the material is composite, the hot melt adhesive is not firmly degumming or non-sticking, which can be analyzed from the following three aspects:
1. Degumming or non-sticking caused by insufficient amount of glue on hot melt adhesive: In order to save construction costs, the amount of glue on the material is very small, and the material that needs to be glued is too heavy, resulting in insufficient bonding strength. At this time, only need to increase the amount of glue can be solved.
2. Degumming or non-stick caused by incompatibility between hot melt adhesive and material: Check whether it is degumming or non-stick caused by incompatibility between the type of hot melt adhesive used and the composite material. Some materials, especially those containing plasticizers, will react chemically with hot melt adhesives, affecting the viscosity of hot melt adhesives. If it is caused by material compatibility, it is only necessary to re-select a hot melt adhesive that can be compatible with the material. For manufacturers, it is very important to do a good job of proofing and testing before mass production!
3, the quality of the purchased hot melt adhesive may have problems: if it is caused by quality problems, such as the lack of hot melt adhesive permeability and other reasons, or it is necessary to investigate the relevant responsibility from the hot melt adhesive supplier. When purchasing again, choose a manufacturer with strength and quality that can be guaranteed as a supplier.
Hangzhou Banglin hot melt adhesive is a research and development, production, sales in one of the hot melt adhesive manufacturers, the company has complete certificates, complete product range, can be customized for customers hot melt adhesive, can meet the different application needs of customers. To purchase strength and quality dual guarantee of hot melt adhesive, you can contact us through the contact information below, we will be the first time to serve you!
