There are many types of hot melt adhesives for glasses cases. If you want hot melt adhesives for glasses cases that can maintain their adhesiveness for more than two years, you can refer to the following aspects:
First: Whether the glue spraying and dispensing effect causes stringing or not.
Good hot melt adhesives for glasses cases do not cause stringing. In this way, the adhesiveness will be better and the initial stickiness will also be slightly higher.
Second: Basic parameter situations.
Nowadays, hot melt adhesives for glasses cases vary in color. There are yellow and white ones. Generally speaking, yellow ones have better adhesiveness than white ones. For other parameters, you can mainly look at its consistency, softening point, melt viscosity and other related parameters. For example, as for consistency, it doesn't mean that the thicker the hot melt adhesive is, the better it is. Instead, it should be within the scope of national standards.
Third: Weather resistance.
Good hot melt adhesives for glasses cases have good high-temperature and low-temperature resistance. They can withstand a minimum temperature of around minus 20 degrees Celsius and a maximum temperature of around 70 to 80 degrees Celsius. With good weather resistance, the adhesiveness will naturally be relatively strong, and there will be no problem in maintaining the adhesiveness for more than two years. However, some hot melt adhesives have poor low-temperature resistance. For example, when used outdoors in regions like Northeast China, the effect may not be so good, and it's difficult to maintain the adhesiveness for more than two years.

