
Hot melt adhesive is sticky, which is closely related to its unique composition and structure.
The main components of hot melt adhesive blocks usually include resins, tackifiers and other additives. Resin is the basis for the formation of viscosity, which has a certain molecular chain structure, and can interact with the surface of the adhesive after melting.
Viscosifier is the key factor to enhance viscosity. The molecules of the tackifiers are able to penetrate into the tiny pores and surface irregularities of the adhered material, thereby increasing the contact area and adhesion.
When hot glue is heated to a molten state, its molecules become active and mobile. After being applied to the surface of the adhesive, hot melt glue can quickly fill the surface of the small gaps and bumps, forming a close contact.
Intermolecular van der Waals forces play a role at this time, making the hot melt adhesive and the adhesive between the adsorption and binding force. At the same time, the hot melt adhesive in the process of cooling and curing, will form a certain cohesion, this cohesion makes the hot melt adhesive itself can maintain a stable form, but also enhance the bonding strength between the adhesive.
In addition, the chemical compatibility of hot melt adhesives with different material surfaces also has an impact on their viscosity. For certain materials, hot melt glue can react with chemical groups on its surface or form chemical bonds, further improving the strength of the bond.
In summary, the viscosity of hot melt adhesives is the result of a combination of factors such as its composition, molecular structure, mobility after heating, and interaction with the surface of the adhesive.
